Instruction manual version 190308
2
For the correct installation of the super light clutch unit, please follow the following instructions:
●
Remove all of the water and oil from the engine and the left hand side crankcase.
●
Unscrew the central nut which holds the clutch in place and remove the complete original clutch unit.
●
Remove the central hub and gear from the original clutch by unscrewing the central nut. Turn the
aluminium hub unit upside down 180° (see above photo) and tighten the nut back into place using
using a 90Nm torque wrench.
●
For an easier installation, we recommend mounting the clutch discs onto the hub and then inserting the
hub unit into the Jetprime clutch cover.
