Fig. 9 - Electrical connections
3 core stove wire
1000 De Luxe BIB
Plug point needed for
connecting
light duty motor
1500 & 1200 Super De Luxe BIB's
1000 De Luxe & 700 standard BIB's
3 core stove wire
220 V electrical source
2 lever switch box:
- One switch controls
light (standard)
- Second switch controls spit motor
(optional)
220 V motor
Leads from switch box
to motor
Spit
Spit
220 V electrical source
Please read written instructions in conjunction with these diagrams.
Electrical connection
5.11
Electrical work should only be carried out by a qualified electrician.
5.12
Please refer to Fig. 9 in addition to the written instructions.
5.13
All built-in models require a 220 V electrical connection for the light
fitting forming part of the outer barbecue box. The light fitting must be
earthed.
5.14
A light switch is needed for the 700 Std, 1000 Std ,1200 Std and 1000
De Luxe. Use insulated stove wire (supplied) to connect.
5.15
1500 and 1200 Super De Luxe models require internal wiring. A two
way switch inside the motor box is used to operate the light as well as the
220 V spit motor. The spit motor must be earthed.
5.16
For connecting each light fitting, a length of 3-core electrical stove wire is
supplied with each barbecue box. The sheath is fitted over the wire
where it passes through the wall of the barbecue box.
5.17
If the electrically-driven spit is incorporated into the 1000 De Luxe, a
suitable plug point to which the 220 V motor can be connected
should be provided.
16
5.18
The spit when fitted should never be turned by hand as you will strip the
gearing inside. To turn the spit turn the motor on and then off.
Back to
content page
