Fig. 5 - Conventional roofs
Installation of Hex, Lynx and Victor models
Cowl (supplied)
Galvanised/lead flashing by
plumber to suit flue size and
pitch (see Fig 6 for rotating
Hex and thatched roofs).
Escutcheon plate
(supplied)
Seal with black silicone sealer
(supplied)
Seal joint at collar with black
silicone sealer (supplied) and
secure with self-tapping screws
if necessary
Secure fibreglass between
ceiling and roof with wire mesh
(supplied)
Fibreglass insulation (supplied)
Leave gap between ceiling
and chimney flue
Seal with black silicone sealer
(supplied) on inside at base of
flue (
Hex
model), or outside at
base of flue (
Victor
model).
Hearth by builder
Please read written instructions in conjunction with these diagrams.
10
Back to
content page
