READ AND SAVE THESE INSTRUCTIONS
TEMCO FIREPLACE PRODUCTS, Inc.
INSTALLATION INSTRUCTIONS
PRESTIGE SERIES
UNIVERSAL CUSTOM HOME VENT-FREE FIREBOX
MODELS: ADCH39F and ADCH45F
These fireboxes are approved as universal fireboxes and can be paired with any ANSI Z21.11.2 approved
vent-free log set. The vent-free log manufacturer's instructions - including their required dimensional
clearances for firebox size - must be followed.
Refer to the manual that is packed with the log set for operating instructions
This book contains your installation instructions and should
be kept in a safe place. For you to realize all the
advantages and use of the reliable service that has been
engineered into your TEMCO fireplace, you must carefully
follow all of the instructions contained in this book regarding
installation and operation of the fireplace.
These instructions should be read carefully in their entirety
before beginning installation of the fireplace.
It is suggested that you wear work gloves and safety
glasses to protect your hands and eyes when installing your
fireplace.
NOTE:
Authorities having jurisdiction (i.e. building
inspectors, fire marshals, etc.) should be consulted before
installation to determine the need to obtain a permit.
The following optional accessories are available for use
with your fireplace.
Decorative Louver Trim Kit -
(polished brass finish)
Flush Panel Kit -
Heat Reducing Canopy -
UC42, UC36
Brick Canopy - BC42 (For ADCH45F), BC36 (For
ADCH39F)
P.O. Box 1349 Manchester, TN 37349
P.O. Box 1148 Perris, CA 92572
A subsidiary of Temtex Industries, Inc.
REV. 8/28/02 12:49 PM 76345J
CLASSIFIED
UNVENTED GAS
FIREPLACE
ACCESSORY
Click here to print
