Tertiary Air Tube Removal and V Board Baffle Removal
There are two tertiary air tubes located at the top of the inner firebox to bring air into the fire. One is large and
one is small. Each tube is held in its position by a swing cam catch attached with a single 8mm bolt to the right
hand inner side of the firebox. The cam catch has a locator at its end that locates in a hole at the end of the
tube. When the cam catch locator is positioned in the tube hole the bolt is tightened to hold it in this position thus
trapping the tube. This ensures that the tube will not slide out and it keeps the tube with its tertiary air ports in the
correct position within the fire.
Above the two tubes are three V board baffles. The two lower baffles are loose, just resting on the tubes and
touching the rear of the inner firebox. They are not fixed with any fixings. The one upper V board baffle is held in
place by a clamp that is fixed at the front top of the inner firebox.
V-board panels
Cam Catch
Upper V-board baffle
Lower V-board baffles
Upper V-board clamp
Tertiary Air Tubes
8mm bolt
Locator
14
Summary of Contents for INSET STOVE MKIII 60i
Page 35: ...35...
