background image

We would like to thank you for purchasing one of our gas fireplaces

1

Jetmaster warrants that the burner and controls of this Gas Grate or Gas Convector

will be free from defects in workmanship or materials under normal use and service
for a period of one year from the invoiced date of purchase.

2

Jetmaster warrants that the Gas Convector firebox will be free from defects in

workmanship or materials under normal use and service for a period of ten years
from the invoiced date of purchase. This Warranty does not cover rust as all units
are made of mild steel.

3

This warranty is only effective if:

3.1

At the time of the claim the then owner of the Gas Grate/Gas Convector

burner and/or firebox produces documentary evidence to prove the date
of purchase, e.g. the original or true copy of the invoice.

3.2

The Warranty Card (supplied separately) was fully completed and returned

to Jetmaster by main or by fax within 30 days of purchase.

3.3

The Gas Grate/Gas Convector burner and/or firebox was installed by a

registered LPGAS Association fitter and was purchased from an appointed
Jetmaster Agent.

3.4

The installation, operation and maintenance of the Gas Grate/Gas Convector

burner and/or firebox was, in the opinion of Jetmaster, carried out in
accordance with the Installation and Operating Instructions current at the
time of purchase and no modifications have been made to the product
without written authority.

4

When a valid claim arises under this Warranty, Jetmaster will, as its sole option,

either repair or replace the Gas Grate/Gas Convector burner and/or firebox,
having firstly been investigated by the appointed Distributor of Jetmaster.

5

Under no circumstances will Jetmaster be liable for any consequential loss or

damage or injury arising out of, or in connection with, the use or operation of the
Gas Grate/Gas Convector burner and/or firebox resulting from the failure to
follow the Installation and Operating Instructions, or from a breach of the Warranty
conditions.

Summary of Contents for 550
























Reviews: