JETI model SPS 20, User Manual

Page: 46 / 80

Elektronic Switch Elektronic Switch Elektronic Switch
When switching on the electronic switch, first connect
both batteries and only afterward switch the system on
by using the magnetic switch. When switching-off,
follow the same rule. First switch the system off using
the magnetic switch and only afterward disconnect the
batteries.
Attention!!
3.4 Battery Charging
The batteries can be charged when they are connected to
the DSM10 (Only when the DSM10 is switched off – the
green LED must be off ), but never disconnect one or both of
the batteries while you are charging.
Also, the charging
voltage must be connected directly to the battery, not
to the DSM10 output!!
If it is necessary to disconnect a
battery during the charge process, disconnect the charging
voltage first! If you ignor this rule, your DSM10 will be
destroyed!
EN
46