JETI model SPS 20, User Manual

Page: 39 / 80

Elektronic Switch Elektronic Switch
PAY ATTENTION to the correct connection of the input
and output of the switch. Improper connection may
cause irreversible damage to the device.
2.3 Switch control
The µSW-15 (MICROSWITCH) switch is operated by using
the enclosed magnetic key. To turn on or off, the key must be
placed in the center of the switch so that the mark on the
key matches the red dot on the switch cover. The reach of
the key is a few millimeters, so the switch can be operated
even through the body of the model.
To display the status, the switch is fitted with a green, high-
brightness LED indicating the "ON" status. If the switch is
placed on the inner wall of a regular laminate hull of the
model, its light is clearly visible.
2.4 Charging of the battery
The accumulator can be permanently connected to the
MICROSWITCH switch and can be charged when the
MICROSWITCH is switched off, for example with a balance
connector or an auxiliary charging connector.
The battery can also be charged disconnected from the
model. The switch retains information about whether it was
EN
39