JETI model SPS 20, User Manual

Page: 31 / 80

Elektronic Switch Elektronic Switch
ON
ON/OFF
in such a manner, that the key mark on the cover and the
key mark at the magnetic switch will show the same
orientation. The magnetic switch contains a LED showing
the „switched on“ state.
key
target
LED On
When applying the magnet to the key mark the green LED
lights on permanently after a time lag of approximately 1 s
and the electronic switch becomes switched on. Switching
off takes place analogically, after renewed application of the
magnet and another time lag of
1 s the green LED goes out
and the system is switched off.
Warming! - The switching system always keeps the last
information whether it has been switched on or off. If you
switch on the system with the aid of the magnetic switch and
disconnect
afterwards the supply battery from the electronic
switch, after reconnection of the battery the electronic switch
will automatically switch on again. To be on the safe side you
should before disconnection of the supply battery always first
switch off the system with the aid of the magnetic switch.
EN
31