EN
MAX BEC / SBEC
MAX BEC / SBEC
Never connect to a different voltage. The pin works exclusively on
the Pull-Up mode.
Pull-Up.
3.2.6.2 Configuration via the DC/DS transmitter
The
SBEC 30D
can be configured by a DC/DS transmitter via the
„Device Explorer“
menu. It is necessary to follow these rules for
configuring the SBEC 30D via transmitter:
- Receiver firmware version Duplex 3.12 (REX 1.10) and newer
- The receiver must be connected to the SBEC
30D via EX bus
- Transmitter firmware version 4.28 and newer
- File SBEC30D.bin stored in the
“Devices”
folder on the transmitter
SD card
When everything is properly connected and configured, the SBEC
30D item appears in the
“Device Explorer”
menu. Entering the item
moves you to the configuration menu.
General settings
• Voltage settings
– setting the output voltage of the BEC.
• Expander settings
– setting the alternative functions of Ext1, Ext2
outputs.
Off
- EXT is not used,
Expander
– EX Bus, possibility to connect a
sensor and other devices supporting the EX Bus protocol, Log.input
– logical input
21 EN
