EN
MAX BEC / SBEC
MAX BEC / SBEC
2.1.1 Parameters Single BEC:
Dimensions :
19x9,3x6,6 mm
Weight :
5 g
Recommended input voltage : 5,5 - 8,4 V
Input voltage max:
24 V
Output voltage :
5,5 V
Sustained current :
1 A
Peak current :
15 A
2.2 MAX BEC
2.2 MAX BEC
MAX BEC
can be supplied either by NiXX or LiXX cells,
recommended is 2 LiXX cells or 5-6 NiXX cells. Input voltage is
indicated by four LEDs. If the input voltage is above 7.0 V, all three
green LEDs are ON. While the cells are gradually discharging,
particular LEDs go OFF depending on input voltage (lower then 7 V,
6.7 V, 6.45 V). If the input voltage is under 6.5 V, the red LED goes ON
indicating that cells are discharged (if using 2S LiXX then it means
that voltage of particular cells is under 3.25 V). Output voltage is
extracted from output side with 2 links. It is recommended to
connect both 2-links, it results in higher reliability and lower current
loading on connectors.
Switch
Receivers
ACCU
MAX
BEC
MAX
BEC
2 LiXX
5-6 NiXX
IN
OUT
10A
+
-
+
-
+
6 EN
FIG. 2: Example of MAX BEC connection
