User´s manual: Intelligent switch ENLINK 2RS Plus
-6-
5.
Update and changing PPM/Servo firmware version
The ENLINK 2RS Plus allows updating of its firmware via PC. Updating is done using the JETI USB
adapter.
Procedure:
o
Find the program to update to the latest firmware on the manufacturer´s website under
„Downloads“. Save it to your computer.
o
Connect the USB adapter to your computer. The procedure of installing the drivers for the
USB adapter is included in the USB adapter manual.
o
Run the firmware update on your PC and select the firmware version – either PPM or Servo.
o
Connect the USB adapter via the three-wire cable to the Master input of the ENLIK 2RS
Plus.
o
After connecting the device the update will begin.
6.
Technical data for the ENLINK 2RS Plus
Technical data:
ENLINK 2RS Plus
Recommended input voltage
5 – 8.4 V
Maximum input voltage
16 V
Customize current consumption
Typ. 3.5mA
Output pulse current
12 A
Output constant current
3 A
Max. number of connected servos
2 pcs
Operating temperature
- 20°C up to +85°C
Weight
11 g
Dimensions
38 x 12 x 6.5 mm
