User´s manual: Intelligent switch ENLINK 2RS Plus
-3-
It is possible to reach an even greater level of safety by using two transmitter modules (e.g. Duplex
or FM and Duplex) and two receivers.
The JETIBOX terminal is used to set the parameters of the ENLINK 2RS Plus. The ENLINK´s three-
wire cable (red connector) with the JR style connector can be connected directly to the JETIBOX. Then
it is necessary to ensure power supply for the JETIBOX e.g. using a 4xNiCd battery. At the same time
it is possible to connect the Slave input not only the JETIBOX, but also servo impulses from one of
the receivers. Then you can connect a servo to the ENLINK output and check the actual servo position
on the JETIBOX:
