JETI model DUPLEX DC-24, Manual, Page: 155 / 168

computer radio control system EN
4. When you press the “F4 (Curve)” button
you go directly to curve function menu
screen.
5. From the curve type options select
the “x>0” type. Adjust the curve, if
necessary, so that the middle point is at the
50% output point (in the middle).
a. Flight mode setting configuration
b. Curve type icon
c. Switch assignment for the spoiler mix function
d. Delay for the mix function deployment or retraction
One of the most commonly used mixes for sailplanes, this mix
function will allow you to mix rudder function with your ailerons to
help your model have more coordinated turns. You can use one of
the free mixers to set up this mixing function.
12.7 Ailerons to Rudder Mix
1. From inside the "Fine Tuning, >Free
mixes“ menu, press the „F2 (Add)“ button
to create a new mix.
2. In the "From“ menu line, select the
“Ailerons” input function as the master
function and in the „To“ line select the
“Rudder” for your slave function. The
“Master Value” represents the percentage
of elevator travel as it relates to the spoiler
travel. Press
“F5 (Next)” to save the mix.
3. To edit the mix simply highlight the mix
and press the “F4 (Edit)” button to go into
the selected mix’s advanced menu.
5.
5.
a
b
c
d
153