JETI model DUPLEX DC-24, Manual, Page: 140 / 168

computer radio control system EN
•
Playback Volume – volume of played WAV files (Alarms, Audio
Player and Sound on Event).
•
Stop Playback Switch – after
activating the assigned switch (in
the picture Sj), all currently played
WAV files are being stopped. This
doesn’t influence any further
playback.
9.6.7 Installed Modules
This summary table is used to quickly view
all the modules available in the transmitter.
It is possible to determine whether the
feature is enabled or disabled (indicated by
tick, respectively crossing). You'll also find
the number of elements useful for active
modules and maximum values that are
available for purchase as expansion packs.
4.
4.
9.6.9 USB
This menu allows you to establish communication between your
DC/DS and a PC once you have connected the two with a USB cable.
How to connect your DC/DS to a PC:
1. Manually enter the menu: „Menu, >System, >USB“
2. When prompted, connect your transmitter and the PC with a
USB cable.
9.6.8 Limitations I n C opying M odels B etween T ransmitters
When copying models from one transmitter to another one, it is
necessary to bear in mind that the transmitters may not have the
same software equipment. Thus it is possible that the configuration
of the activated modules may not correspond. In this case it is
necessary to check individual features of the model. Loading the
model memory to a different transmitter with different activated
modules can be carried out, but according to the use of individual
modules the transmitter can display warnings or does not allow
loading the model.
The table (9.6.8) shows the conditions under
which a warning message will be displayed indicating that the
model will be loaded in a limited form, or will not load at all.
138