JETI model DC-14 II, User Manual

Page: 43 / 72

computer radio control system
EN
The lower bar is found at the bottom of the main display.
The lower bar shows:
1. Tools - fast transmitter setup: Color profile, Telemetry,
Volume, Backlight duration, brightness
2. Left Arrow -move left within the desktop pages.
3. Right Arrow -move right within the desktop pages.
4. Clr - resets the timers or opens the Data Analyzer application in
the main desktop window.
5. Stop/Start -begin and end flight timer, triggering timers or
telemetry recording.
Use the corresponding F1-F5 buttons to select these options
From the main display you may access the main menu by pressing
the
"menu“ button. To return from the main menu press either the
"menu“ or "esc“ button.
From the main display, when you push any of the trim buttons or the
3D button the "Trim menu” will be displayed.
1
2
3
4
5
8.2 Navigation in the Menu
8.2.1 Navigation
1. The „menu“ button allows you to switch between the main
display and the transmitter‘s main menu.
2. The "esc“ button allows you to move one level back within the
menu. If you push this button while you are editing a value you
will return one menu level and the edited value will NOT be
stored.
3. 3D Control Selector
3a - by turning the selector counter-clockwise you will move
up in the menu. Turning the selector this direction will
also decrease any value you are editing.
- by turning the selector clockwise you will move down in 3b
the menu. Turning the selector this direction will also
increase any value you are editing.
- by pressing the selector you will confirm your 3c
choice/enter the selected menu.
4. The „F1 - F5“ functions buttons located below the display are
used to select various options based upon the current display.
Also, If you push this button while turning the 3D Control
Selector to edit values, the values can be changed faster. With
the menu button pressed, 10 more values are changed per turn.
Advice:
43