JETI model DC-14 II, User Manual

Page: 49 / 72

computer radio control system
EN
8. The "Swash Mix“ menu displays the travel
range of each particular helicopter flight
function for the swash plate for flybarred
helicopters. The travel range is displayed as a
percentage. You can use these travel range
adjustments to prevent linkage binding and
to tune the helicopter to suit your flying
9. The screen will display a question which
asks if you really want to create and activate
the new model. Press the
"F5(Yes)“ button
to confirm.
10. The " Servo Setup “ menu is where you
can set all of your servo neutral positions,
servo output throw limits, servo reversing,
delay etc. You should return to this menu
after you have bound your receiver and
transmitter.
See chapter 9.3: Receiver-
>Binding.
style. You can also activate a cyclic reduction of the rotor head travels
(Swash Ring) so the servos cannot be damaged by large simultaneous
movements of the sticks.(Refer to your helicopter’s instruction
manual.) Press the
"F5(Next)“ button to confirm.
11. Once your transmitter has been bound with a receiver and has
been connected to its power supply, the last step consists of tuning
the servo output functions,
see chapter 9.3.5: Setup of receiver
outputs.
In the " Fine tuning -> Flight modes “ menu you will setup these
advanced model control functions for your helicopter:
Collective pitch curve , see: Fine tuning -> Flight Modes->Function
Curves
Throttle curve
, see: Fine tuning -> Flight Modes->Function Curves
Dual rates , see: Fine tuning -> Dual Rate/Expo
Autorotation , see: Fine tuning -> Flight Modes
Gyro/Governor see: Fine tuning -> Gyro/Governor
For convenience, a quick link to all of these function settings has been
made through the Heli Tuning menu.
8 .3.3 Multicopter
The DC/DS transmitters allow you to simply create a multicopter
model equipped with gear and camera gimbal. By default, after the
creation of a multicopter model, the digital trims are disabled.
49