JETI model Central Box, User Manual

Page: 6 / 42

EN
• Easy settings changes via DC/DS transmitter
• Firmware updates by user
• Suitable for use with high voltage (HV) servos
• Compact size for easy installation
• Each output is individually configurable (channel assignment,
trim, reverse, ATV)
2 Description
2.1.1 Central Box 2 10
• Central Box 210 has 15 outputs for servos (support of DITEX
telemetry servos).
• Each of the outputs can be operated in these modes:
- servo output (default setting)
- Digital output
- Digital input
- Ditex
• Moreover, channels E3/14 and E2/15 are also configurable to
alternative uses, such as:
- an input for telemetry sensor
- EX Bus expander – used for connecting devices which
support the EX Bus protocol (the Central Box, a sensor,…)
- S.BUS Output (only channel E2/15)
• E1/R3 port can be configured for use as:
- an output to connect a JETIBOX or Duplex EX receiver to
configure the Central Box
- an input for telemetry sensors
- EX Bus expander - used for connecting devices which
support the EX Bus protocol (the Central Box, a sensor,…)
- an input for receiver (supports only EX Bus protocol)
The E1/R3 slot is also used for the firmware update connection
(using the USBa - USB adapter).
2.1 Central Box 2 10/220
5 EN