PAGE 50 of 54
If the throttle stick is set at less than half throttle and the
AUX
switch is
momentarily placed in the
SW0
position, the current flight speed is
assigned and recorded as the Min.AirSpeed parameter.
If the throttle stick is set at greater than half throttle and the
AUX
switch is
momentarily placed in the
SW0
position, the current flight speed is
assigned and recorded as the Max.AirSpeed parameter.
By momentarily activating the
AUX
switch, this option makes it possible to
store a particular slow or fast model speed, while in flight. These values
then become the parameters for the
Cruise Control
mode, plus the
operator can also display the values in the
limits
menu, after landing.
WARNING:
When the
AUX
switch is set in the
SW0
position, the model
must be flying faster than 40 km/h, otherwise the turbine will shut off.
Lrn Speed Lo
Learns the slow flight speed.
If the
AUX
switch is momentarily placed in the
SW0
position, the current
flight speed is assigned and recorded as the Min.AirSpeed parameter.
WARNING:
When the
AUX
switch is set in the
SW0
position, the model
must be flying faster than 40 km/h, otherwise the turbine will shut off.
Lrn Speed Hi
Learn the fast flight speed.
If the
AUX
switch is momentarily placed in the
SW0
position, the current
flight speed is assigned and recorded as the Max.AirSpeed parameter.
WARNING:
When the
AUX
switch is set in the
SW0
position, the model
must be flying faster than 40 km/h, otherwise the turbine will shut off.
LIN-Speed Ctrl
Cruise Control
mode, with linear speed regulation to the throttle stick
position.
Flight speed is controlled between the values of the “Min AirSpeed”
(throttle stick in the minimum position) and “Max AirSpeed” (throttle stick
in the maximum position).
3-StepSpdCtrl
Cruise Control
mode, featuring three different speeds.
Flight speed can be set to three predetermined speeds, between the
values of “Min AirSpeed“ (throttle stick in the minimum position) and “Max
AirSpeed” (throttle stick in the maximum position).
Speed 1: “Min AirSpeed”
throttle stick in the minimum to 1/3 position
Speed 2: (“Min AirSpeed” + “Max AirSpeed”) / 2
throttle stick in the
1/3 to 2/3 position
Speed 3: “Max AirSpeed”
throttle stick in the 2/3 to maximum
position
Reminder:
The turbine can be immediately switched off, any time the throttle stick and the throttle trim are
brought to their minimum positions.
If
Hold-Speed
or
Cruise Control
modes are activated, while the model is flying over 40 km/h --
and should the model then slow down, to a speed less than 40 km/h --
Hold-Speed
or
Cruise
Control
will remain active
. The turbine will NOT shut off, unless the
AUX
switch is moved back
to the
SW1
position and then returned to
Hold-Speed
or
Cruise Control
position.
WARNING:
