Page 38/39
Lrn Speed Lo
Learns the slow flight speed.
If the
AUX
switch is momentarily placed in the
SW0
position, the current
flight speed is assigned and recorded as the Min.AirSpeed parameter.
WARNING:
When the
AUX
switch is set in the
SW0
position, the model
must be flying faster than 40 km/h, otherwise the turbine will shut off.
Lrn Speed Hi
Learn the fast flight speed.
If the
AUX
switch is momentarily placed in the
SW0
position, the current
flight speed is assigned and recorded as the Max.AirSpeed parameter.
WARNING:
When the
AUX
switch is set in the
SW0
position, the model
must be flying faster than 40 km/h, otherwise the turbine will shut off.
LIN-Speed Ctrl
Cruise Control
mode, with linear speed regulation to the throttle stick
position.
Flight speed is controlled between the values of the “Min AirSpeed”
(throttle stick in the minimum position) and “Max AirSpeed” (throttle stick
in the maximum position).
3-StepSpdCtrl
Cruise Control
mode, featuring three different speeds.
Flight speed can be set to three predetermined speeds, between the
values of “Min AirSpeed“ (throttle stick in the minimum position) and “Max
AirSpeed” (throttle stick in the maximum position).
Speed 1: “Min AirSpeed”
à
throttle stick in the minimum to 1/3
rd
position
Speed 2: (“Min AirSpeed” + “Max AirSpeed”) / 2
à
throttle stick in the
1/3
rd
to 2/3
rd
position
Speed 3: “Max AirSpeed”
à
throttle stick in the 2/3
rd
to maximum
position
Reminder:
The turbine can be immediately switched off, any time the throttle stick and the throttle trim are
brought to their minimum positions.
If
Hold-Speed
or
Cruise Control
modes are activated, while the model is flying over 40 km/h --
and should the model then slow down, to a speed less than 40 km/h --
Hold-Speed
or
Cruise
Control
will remain active
. The turbine will NOT shut off, unless the
AUX
switch is moved
back to the
SW1
position and then returned to
Hold-Speed
or
Cruise Control
position.
WARNING:
Make sure the
Airspeed Sensor
is working, before using features that require a minimum flight
speed to operate. If the system is not operating properly, you may inadvertently shut off your
engine, in flight. To verify that the
Airspeed Sensor
is functioning, apply a little air pressure
and note the change in “
Airspeed
” on the
run
menu display.
