
Page 23/39
RUN (reg.)
Turbine in the normal running state; the throttle stick will regulate turbine
thrust.
During this operant condition, the green
OK
LED will illuminate,
indicating that pilot has control.
RUN (reg.)
continues, until the turbine is switched off.
AutoOff
The AUX switch placed in the
AutoOff
position.
Turbine automatically adjusts to 55,000 RPM and remains at that RPM
for approximately six (6) seconds, before transition to the next state
(
SlowDown)
.
SlowDown
During this state, the fuel shut-off valve is closed and the fuel pump is
stopped.
The green
OK
LED blinks, indicating
SlowDown
This condition will continue, until all of the following parameters are met:
•
Turbine speed less than 800 RPM
•
EGT is less that 100 degrees C.
•
The AUX switch is moved to the
Off
position and throttle trim is
moved to the minimum position
Once these conditions are met, turbine proceeds to
Off
.
Manual
ECU in manual mode, with yellow
Standby/Manual
LED blinking.
The fuel valve is opened and the throttle stick controls the fuel pump.
(See page 18 for details).
SpeedCtrl
Speed Control mode -- only active when the air speed sensor is
connected. Regulates model flight speed.