Monthly oil the table clamp screw
(A, Fig7) and the lock pin (B, Fig 10).
9. Trouble shooting
Motor doesn’t start
*No electricity-
check mains and fuse.
*Defective switch, motor or cord-
consult an electrician.
Sanding belt slips
*Belt tension inadequate-
tighten sanding belt.
*Too much applied pressure
move workpiece while sanding.
Disc stalls
*Motor belt loose-
tighten belt.
*Too much applied pressure
move workpiece while sanding.
Machine vibrates excessively
*
Stand on uneven floor-
adjust stand for even support.
Abrasive belt keeps tearing
*Belt is running the wrong direction-
observe arrow on the sanding belt.
Sanded edge not square
*Table not square to sanding disc-
Adjust positive stop for 90
.
Sanding marks on the wood
*
Workpiece was held still-
keep workpiece moving.
*Wrong grit sanding belt-
use coarser grit for stock removal
and fine grit for finish sanding.
*Feed pressure too high-
never force the wood.
10. Environmental protection
Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.
11. Available accessories
Refer to the JET-Pricelist
for various grit sanding belts and
sanding discs.