4. Machine specifications
4.1 Technical data
JPT-260:
Planing
Jointing width
max 257 mm
Table length
1120mm
Height above floor
850mm
Fence size
1100 x 150mm
Fence tilt
0 - 45°
Depth of cut
max.3 mm
Thicknessing
Thicknessing width
max 256 mm
Thicknessing height
3 - 225 mm
Thicknessing table length
540mm
Min. length of work piece
150mm
Feed speed
5,5 m/min
Depth of cut
max. 4,5 mm
Number of knives
3
Cutter block diameter
70 mm
No load speed n
o
5500 rpm
Cuts per minute
16500
Cutter knife length
260 mm
Cutter knife width
15 - 25mm
Cutter knife thickness
3mm
Dust port diameter
100mm
Overall (LxWxH)
1120x700x1000
Net Weight
170 kg
Mains
230V ~1/N/PE 50Hz
Output power
1,7 kW (2,3 HP) S1
Reference current
10 A
Extension cord (H07RN-F) 3x1,5mm²
Installation fuse protection
16A
Mains
400V ~3/PE 50Hz
Output power
1,7 kW (2,3 HP) S1
Reference current
3,5 A
Extension cord (H07RN-F) 4x1,5mm²
Installation fuse protection
16A
JPT-310:
Planing
Jointing width
max 307 mm
Table length
1400mm
Height above floor
850mm
Fence size
1100 x 150mm
Fence tilt
0 - 45°
Depth of cut
max.3 mm
Thicknessing
Thicknessing width
max 307 mm
Thicknessing height
3 - 225 mm
Thicknessing table length
540mm
Min. length of work piece
150mm
Feed speed
7 m/min
Depth of cut
max. 4,5 mm
Number of knives
3
Cutter block diameter
70 mm
No load speed n
o
5500 rpm
Cuts per minute
16500
Cutter knife length
310 mm
Cutter knife width
15 - 25mm
Cutter knife thickness
3mm
Dust port diameter
100mm
Overall (LxWxH)
1400x750x1000mm
Net Weight
230 kg
Mains
230V ~1/N/PE 50Hz
Output power
2,2 kW (3 HP) S1
Reference current
13 A
Extension cord (H07RN-F) 3x1,5mm²
Installation fuse protection
16A
Mains
400V ~3/PE 50Hz
Output power
2,2 kW (3 HP) S1
Reference current
5 A
Extension cord (H07RN-F) 4x1,5mm²
Installation fuse protection
16A
JPT-410:
Planing
Jointing width
max 407 mm
Table length
1660mm
Height above floor
850mm
Fence size
1100 x 150mm
Fence tilt
0 - 45°
Depth of cut
max.3 mm
Thicknessing
Thicknessing width
max 407 mm
Thicknessing height
3 - 225 mm
Thicknessing table length
600mm
Min. length of work piece
150mm
Feed speed
7 m/min
Depth of cut
max. 4,5 mm
Number of knives
3
Cutter block diameter
70 mm
No load speed n
o
5500 rpm
Cuts per minute
16500
Cutter knife length
410 mm
Cutter knife width
15 - 25mm
Cutter knife thickness
3mm
Dust port diameter
120mm
Overall (LxWxH)
1660x870x1000mm
Net Weight
315 kg
Mains
230V ~1/N/PE 50Hz
Output power
2,2 kW (3 HP) S1
Reference current
13 A
Extension cord (H07RN-F) 3x1,5mm²
Installation fuse protection
16A
Mains
400V ~3/PE 50Hz
Output power
3 kW (4 HP) S1
Reference current
6,5 A
Extension cord (H07RN-F) 4x1,5mm²
Installation fuse protection
16A
4.2 Noise emission
Determined according to EN 861
(Inspection tolerance 4 dB)
Work piece pine wood:
W=100mm, L=1000mm, moisture 8,5%
Planing:
Acoustic power level
(according to EN ISO 3746):
Idling
LwA 89 dB(A)
Operating
LwA 101 dB(A)
Acoustic pressure level
(according to EN ISO 11202):
Idling
LpA 78 dB(A)
Operating
LpA 96 dB(A)
Thicknessing:
Acoustic power level
(according to EN ISO 3746):
Idling
LwA 92 dB(A)
Operating
LwA 103 dB(A)
Acoustic pressure level
(according to EN 11202):
Operating position 1:
Idling
LpA 74 dB(A)
Operating
LpA 91 dB(A)
Operating position 2:
Idling
LpA 84 dB(A)
Operating
LpA 95 dB(A)
The specified values are emission
levels and are not necessarily to be
seen as safe operating levels.
Although there is a correlation between
emission and imission levels, these do
not constitute a basis for determining
the necessity of additional safety
measures.
Workplace conditions which could
influence the noise imission level
include the duration of resonance,
spatial particulars, other noise sources
etc. For example, the number of
machines and other work being
performed. The permissible workplace
levels can vary from country to
country.
This information is intended to allow
the user to make a better estimation of
the hazards and risks involved.
4.3 Dust emission
The planer thicknesser has been dust
emission inspected.
JPT-260, JPT-310:
At an air velocity of 20 m/s on the dust
port dia 100mm:
Vacuum pressure
900 Pa
Volume flow
565 m³/h
JPT-410:
At an air velocity of 20 m/s on the dust
port dia 120mm:
Vacuum pressure
950 Pa
Volume flow
810 m³/h
The machine meets a workplace dust
emission limit of 2 mg/m³.
