Jet ELITE ECD-750BDV, Manual

Page: 6 / 59

6
1.1 Designated use and limitations to use
The machine is for industrial use and has been designed for drilling and tapping machinable metal and plastic materials. With a
suitable dust collection, wood and wood derived materials may be machined also.
The workpiece must allow safely be loaded, supported and clamped for machining.
The machine is intended for indoor use. The protection rating of the electrical installation is IP 54.
If used for other purposes, JET disclaims any real or implied warranty and holds itself harmless from any injury that may result from
that use.
WARNING:
The machine is not suitable for cutting magnesium…high danger to fire !
The machine may not be used in explosive environments.
1.2 Remaining hazards
When using the machine according to regulations some remaining hazards may still exist.
The rotating drill bit can cause injury.
Thrown workpieces and workpiece parts can lead to injury.
Tipping of the workpiece due to insufficient support can lead to injury.
Dust, chips and noise can be health hazards. Be sure to wear personal protection gear such as safety goggles, ear protection and
dust mask.
Assure good ventilation. Use a suitable dust collection or air filtration system.
The use of incorrect mains supply or a damaged power cord can lead to injuries caused by electricity.