Jet AB-1012W, Operating Instructions And Parts Manual

Page: 5 / 52

5
23. Maintain a balanced stance at all times so that you do not fall or lean against the blade or other moving
parts. Do not overreach or use excessive force to perform any machine operation.
24. Remove any cut off piece carefully while keeping your hands away from the blade area.
25. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for which
it was not designed. The right tool will do the job better and safer.
26. Use recommended accessories; improper accessories may be hazardous.
27. Maintain tools with care. Keep blade sharp and clean for the best and safest performance. Follow
instructions for lubricating the machine and changing accessories.
28. Make sure the work piece is securely clamped to the table before cutting.
29. Be sure the blade is not in contact with the workpiece when the motor is started. Allow the saw to come up
to full speed before bringing saw blade into contact with workpiece.
30. Bring adjustable guides and guards as close as possible to the workpiece.
31. Turn off the machine and disconnect from power before cleaning. Use a brush or compressed air to
remove chips or debris — do not use your hands.
32. Avoid contact with coolant, especially guarding your eyes.
33. Do not stand on the machine. Serious injury could occur if the machine tips over.
34. Never leave the machine running unattended. Turn the power off and do not leave the machine until it
comes to a complete stop.
35. Remove loose items and unnecessary work pieces from the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious or possibly fatal
injury.
- - SAVE THESE INSTRUCTIONS - -
4.0 Introduction
This manual is provided by Walter Meier (Manufacturing), Inc., covering the safe operation and maintenance
procedures for a JET Model AB-1012W Horizontal Band Saw. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in accordance
with instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or Walter Meier. Walter Meier can also be reached at our web site: www.waltermeier.com.