5
26. Maintain tools with care. Keep cutting tools
sharp and clean for the best and safest
performance. Follow instructions for lubricating
and changing accessories.
27. Turn off machine and disconnect from power
before cleaning. Use a brush or compressed
air to remove chips or debris — do not use
your hands.
28. Do not stand on the machine. Serious injury
could occur if the machine tips over.
29. Never leave the machine running unattended.
Turn power off and do not leave machine until
it comes to a complete stop.
30. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
31. Do not grind magnesium, as it may create a
fire hazard.
Familiarize yourself with the following safety
notices used in this manual:
This means that if precautions
are not heeded, it may result in minor injury
and/or possible machine damage.
This means that if precautions
are not heeded, it may result in serious or even
fatal injury.
4.0
About this manual
This manual is provided by JET covering the safe operation and maintenance procedures for a JET Model BG-
379 Belt Grinder. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed
to provide consistent, long-term operation if used in accordance with instructions set forth in this document.
This manual is not intended to be an exhaustive guide to belt grinder operational methods, stock choice,
abrasive selection, etc. Additional knowledge can be obtained from experienced users or trade journals.
Whatever accepted methods are used, always make personal safety a priority.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
