- Hoses may be above waterline
- Heat up hose with a electrical heat gun to be able to make a nice steady curve
- Cut hose to appropriate length with a sharp knife (do not saw). Cut coiled wire with pliers
- Prevent kinks of dents in hose
- Prevent damaging the hose (sharp parts in vessel)
- Attach hose to hull with bonding fasteners
8: Control panel in helm station
- Use drilling template for installing control panel
- Glue front plate panel onto dashboard with flexible marine sealant
9: Controller
- Preferably install controller near the switch panel
- Use the length of the valve cable (10m) and pump cable (5m)
- Connect controller with 12V Service battery (via switch panel)
- DO NOT change polarity of connection cable! (will cause serious damage!)
- Check if connecters click with audible click
- Check dip-switch settings for Single or Combi function (see next page)
Summary of Contents for D-010-07
Page 2: ......
