5
1
- GENERAL RECOMMENDATIONS
ATTENTION
Read this instructions booklet carefully, as it
contains important advice for safe installation,
operation and maintenance. Keep this booklet
on hand in a safe place for future reference by
other operators.
Installation, use and service of the machine
can be performed only by qualified personnel,
especially trained to follow these instructions:
WARNING!
The
manufacturer
cannot
be
held
responsible for injuries or damages of any
kind occurring to persons, machine or
others, due to lack of conformity with the
operation instructions indicated in this
documentation or for abuse, misuse and
lack of conformity with the instructions
indicated in this document as well as
installation, uninstall, service, tune-up,
maintenance requiring the removal of the
safety components not performed BY
TRAINED TECHNICIANS, will result in the
IMMEDIATE LOSS OF WARRANTY.
Loss of warranty will also result from any
service performed to the machine, when:
Safety component are removed without
disconnecting the power and water supply
or when any safety provision of the
machine has been bypassed, removed or
excluded.
Machine is installed in provisional,
improper or unsafe conditions for lack of
compliance with safety provisions (fuses,
main breaker, ground line, or water inlet
and discharge valves).
When unauthorized modifications or
additions of devices which modify the
operation cycles indicated on the data
chart delivered with the machine.
When non-genuine spare parts are used.
Installation or storage in inadequate
spaces according to the indications of
manufacturer.
Machine utilization different from the
scope
foreseen
as
written
in
the
documentation (ex. Dishes of type or sizes
different from specified).
Utilization of dispensers with corrosive
products.
1A – HANDLING
Use suitable means to move the appliance: a
lift truck or fork pallet trucks (the forks
should
reach
more
than
halfway
undermeath the appliance).
1B – UNPACKING
Before opening the box, verify the condition
and indicate damages on delivery slip if
found. After unpacking, check the machine’s
conditions, in case the machine is damaged,
contact the dealer immediately.
Do not proceed with the installation if
damages are relevant to operation safety
Wait for qualified and authorized assistance.
Save
box
components
(plastic
bags,
expanded polystyrene, nails, etc.) out of the
reach of children for safety reasons.
1-
Wear protective gloves to unpack the
appliance from the box. (Fig. 1)
Fig.1
2-
Lift the appliance using a lift truck. (Fig. 2)
Fig.2
3-
Remove the protection film from the
appliance. (Fig. 3)
Fig.3
