MAGDOS DE / DX
MB 1 02 20 / 3
Verbessernde Änderungen jederzeit ohne Vorankündigung vorbehalten.
JESCO DOSIERTECHNIK GmbH & Co. KG
Power supply cable, 2 m, with plug
Cable for warning alarm relay, 1.5 m
3.5 mm jack for level probe connection;
can be used by 2-pin plug for simple low level
indication or by 3-pin plug for low level indication
with alarm signal.
Cable or connector socket for pulse input
Cable or connector socket for pulse and d.c. signal
input
Adjusting knob for metering capacity per stroke
Locking screw
Stroke frequency adjustment with changeover
switch for external control
Digital display
Red LED
- blinks slowly in the case of alarm signaling and
lights permanently if the tank is empty. Pump is
then stopped automatically.
- like a, plus fast blinking if, in the case of
4...20 mA d.c. signal control, the input signal is
less than 4 mA (e.g. due to a cable rupture).
- blinks slowly, if selector switch (12) is set to "0"
(pump is not metering).
Green LED
lights if power supply voltage is applied and goes
out for a short time during the metering stroke.
Calibration table
Selector switch for external control
Pulse 1:1
1
Pulse division 2 / 4 / 8 / 16 / 32 / 64
Pulse multiplication 2 / 4 / 8 / 16 / 32 / 64
Current input 0...20 mA or 4...20 mA
Pump stop "0"
Control panel MAGDOS DX
Control panel MAGDOS DE
1
2
3
4a
4b
5
6
7
8
9a
9b
10
11
12
