Safety advice |
Operation & Maintenance Instructions
FLOWCON | 5
IMPORTANT!
The use of spare parts that are not genuine negates all claims for damages.
1.9 Metering of chemicals
CAUTION!
When working on batchers the accident prevention regulations applicable on-site must
be observed and the prescribed personal protective clothing must be worn This operating
manual contains basic information to be adhered to during installation, operation and
maintenace. It is therefore essential that the fitter as well as the relevant qualified staff/
operator read the operating manual before installing and starting up. It must be accessible
at the dosing pump/system at all times.
Not only must the general safety instructions under this main heading of Safety be obser-
ved, but also the specific safety instructions outlined under the other headings.
CAUTION!
Chemical could spray out. This may lead to caustic or other burns. Always relieve the
system/pump pressure before starting work on the dosing pump.
WARNING!
Never look into the open end of a clogged line or valve.
Chemical may emerge unexpectedly and cause caustic or other burns to face and hands.
Before start up, all connections must be inspected for correct tightness and, if necessary,
must be further tightened using appropriate tools.
1.10 Scope of delivery
IMPORTANT!
Please unpack the hose pump and ordered accessories attached with great care, so
that small parts do not remain unnoticed in the packaging. Please compare the scope of
delivery immediately with the delivery note. The reason for any discrepancies has to be
ascertained.
