
4 |
Operation & Maintenance Instructions
FLOWCON | Safety advice
may do this on behalf of the pump’s owner. Furthermore, the owner of the system has to
ensure that the contents of this operating manual is fully understood by the personnel.
1.4 Important safety instructions
When installing and using this electrical equipment, basic safety precautions should
always be followed, including the following:
READ AND FOLLOW ALL INSTRUCTIONS!
WARNING!
To reduce the risk of injury, children are not permitted to use this product, they should be
closely supervised at all times.
WARNING!
To reduce the risk of an electric shock, replace a damaged cable immediately.
WARNING!
To reduce the risk of an electric shock, do not connect the unit to an extension cord with
electric voltage, use a suitably located socket instead.
SAVE THESE INSTRUCTIONS!
1.5 Hazards due to non-compliance with safety instructions
Failure to comply with safety instructions may endanger not only people, but also the
environment and the dosing pump/system. Non-compliance with the safety instructions
can lead to the loss of all claims for damages. Non-compliance can lead to the following
hazards:
•
Malfunction of the dosing pump/system’s important functions.
•
Malfunction of prescribed methods of maintenance and servicing.
•
Endangering people through electrical, mechanical and chemical causes.
•
Endangering the environment due to leakages of hazardous substances.
1.6 Safe operation
The safety instructions in this operating manual have to be observed. The owner is respon-
sible for ensuring compliance with local safety regulations.
1.7 Safety instructions for the owner/operator
Leakages (e.g. due to ruptures in the hose) of hazardous materials conveyed (e.g. abrasive,
toxic) have to be discharged in such a way so that there is no danger to people and the
environment. Statutory regulations must be observed.
1.8 Unauthorised modifications and production of spare parts
Modifications and alterations are only permitted after consulting with the manufacturer.
Genuine spare parts and accessories authorised by the manufacturer ensure security.