Installation, Operation, & Maintenance Instructions
IOM J500.35
2021.04
JMT
● +1.440.572.1500
16
If you select
Yes
, the currently measured level will be displayed,
After a few seconds, the user will be prompted to
Redisplay
Media Level
,
ADJ
(Adjust)
Media Level
, or
Exit Without
Saving.
If you agree with the output, simply
Exit Without Saving
. To
calibrate the output to a different measurement, select
ADJ
Media Level.
ADJ Media Level
Unit will show current media level. Use buttons to change value
to desired reading.
Enter
value. Upon completion, you will be
reverted back to
Main Menu
.
Trim
This function is required flipping the transmitter or is moving the
entire unit from one installation (chamber) to another. See
Perform Float Calibration
above.
