2. Care and Cleaning Instructions
3. Maintenance & Inspection
Fabrics, Vinyl and PU (polyurethane)
• Minor spills can be removed with a damp cloth
• Spillages should be removed as quickly as possible after contact, dab the stain, do not rub
• Do not over wet the stain
• Do not use organic solvents, dry cleaning fluids, abrasive cleaners or industrial bleaches
• Antibacterial spray or wipes
• Always ensure that the product is dry before use
Metal Frames, Plastic and Coated Parts
• For deep cleaning, a low pressure steam cleaner can be used
• Do not use organic solvents, dry cleaning fluids, abrasive cleaners or industrial bleaches
• Soap and water or antibacterial spray can be used
• Daily cleaning: Wipe framework down with a damp cloth as necessary
Wooden Products and Parts
• For deep cleaning, a low pressure steam cleaner can be used
• Do not use organic solvents to clean Jenx Products
• Soap and water or antibacterial spray can be used
• Check for breaks or splintering of the wood before re-issuing
• Daily cleaning: Spray polish or wax polish can be used
All Jenx Ltd. products are expected to have a life of 5 years.
Each Jenx Ltd. product must be checked and inspected in line with the advice given in the relevant
product IFU. Failure to complete these regular checks poses a risk to the user. Every year, each product
must be thoroughly inspected by a person competent to assess faults and have the ability to either
rectify any faults discovered, or to outsource this requirement. The maximum period that should elapse
between full product inspections is 1 year. After 3 years or from purchase where a product is subject to
heavy use, this should be increased to six monthly full inspections.
Product Inspection Log Book:
Each product comes with a Product Inspection Log Book (part 3/3 of the Instructions for Use), which
must be used to record any checks, inspections or set-ups for your Jenx product. The Log Book must
stay with the product it pertains to.
Daily Checks:
Daily checks of the equipment should be carried out by carers. These checks are not technical but a
basic understanding of the product is needed. Multiple daily checks may be needed in schools
or therapy rooms where the products are used by multiple users. The checks should include the
following points:
• Replace any lost or worn washers or bolts
• Check tray for damage. Ensure that the tray edging is secure and that the tray
is clean and free of any rough or sharp corners
• Check all upholstery for any signs of wear and tear
• Brush Velcro
®
to remove fluff
• Check straps for fraying and missing or broken buckles
• Clean any stains or spillages
• Contact Jenx Ltd. if any accessories not manufactured by Jenx Ltd. have been attached to
the product. Unauthorised accessories may affect the safety of this product and invalidate
your warranty
• Check that gas spring levers are not bent. Do not use the product if any levers are bent.
Contact your supplier to arrange replacement
