Jensen VX7020, Operating Instructions Manual

Page: 205 / 246

102
VX7020
Changing the Road Types Used in Route Planning
To recalculate the active route with different road type preferences, do as follows.
These changes can also be made in Settings.
1. On the Map screen, tap and then tap .
2. Tap any of the listed road types to modify the route. If needed, scroll the list
for all road types. You have the following options (their order depends on the
selected vehicle type):
t
- You might need to avoid freeways when you are driving a slow
car or you are towing another vehicle.
t
- Charge roads are pay roads where you can purchase a pass or
vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
t
- iGO primo includes toll roads (pay roads where there is a per-
use charge) in the routes by default. If you disable toll roads, iGO primo plans
the best toll-free route.
t
- iGO primo includes ferries in a planned route by default.
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
t - iGO primo excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit on
them.
t - Carpool or HOV lanes can be used if a given number of
passengers are traveling in the vehicle. You should check whether you are
allowed to use carpool lanes before enabling this road type.
3. Tap to confirm the changes. iGO primo recalculates the route.
The orange line now shows the new recommended route.