Jensen VX7020 Page 4 Operating Instructions Manual Download

Page: 4 / 246

VX7020

FCC Statement

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that

may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.
This equipment generates uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance of 20 centimeters between the radiator and your body.

Summary of Contents for VX7020























































































































































































































































Search results

Summary of Contents for VX7020

Reviews:

Related manuals for VX7020

Brands by name

Popular brands

Jensen VX7020, Operating Instructions Manual

Search results

Summary of Contents for VX7020

Reviews:

Related manuals for VX7020

Brands by name

Popular brands