Jensen VX7020, Operating Instructions Manual

Page: 144 / 246

41
VX7020
NAVIGATING
You can set up your route in different ways:
t If you need a route for immediate navigation, you can select the destination and
start navigating to it right away (normal navigation).
t
You can also plan a route independently of your current GPS position or even
without GPS reception (to achieve this, you need to turn off the GPS receiver
and set a new starting point in My Route / Edit Route by tapping the flag icon at
the current position).
You can plan routes with multiple destinations. Select the first destination. Then
select a second destination and add it to your route to create a multi-point route.
You can add as many destinations to your route as you like.
SELECTING THE DESTINATION OF A ROUTE
iGO primo offers you several ways of choosing your destination:
t
Enter a full address or a part of an address, for example a street name without a
house number or the names of two intersecting streets.
t
Enter an address with ZIP code. This way you do not need to select the name of
the city and the search for street names might be faster as well.
t Use a built-in Place of Interest as your destination.
t
Select a location on the map with the Find on Map feature.
t
Use a previously saved Favorite destination.
t
Select a location from the History of previously used destinations.
t
Enter the coordinate of the destination.
t Use the location where a photo was taken.
Entering an Address or a Part of the Address
If you know at least a part of the address, it is the quickest way to select the
destination of the route.
Using the same screen, you can find an address by entering:
t
the exact address, including house number
t
the center of a city/town
t
an intersection
t
the midpoint of a street
t any of the above, starting the search with the ZIP code.