background image

VR182

8

System Menu

1.

Press and hold

 the 

MENU/AUDIO

 button (3) for more than 3 seconds to enter the system 

menu. 

2.

Rotate the 

VOLUME

 control (1) to highlight the desired item. 

3.

Press the 

VOLUME

 button (1) to select the highlighted item.

4.

Rotate the 

VOLUME

 control to select a value.

5.

Press the 

VOLUME

 button to return to menu selection mode.

The following feature functions can be adjusted:

BEEP (ON/OFF): Turn the audible beep ON/OFF (heard when functions/buttons are 
selected).

P-VOLUME (00 – 46): Select an automatic turn-on volume.

AREA (EURO/USA)

P-CLOCK (ON/OFF): Choose “ON” to display the clock in large format when the radio is 
turned off while ACC is on.

CLOCK (12/24 HOUR)

CONTRAST (-6 – +6)

BRIGHTNESS (0 – 7)

AUTO IPOD (ON/OFF): Choose “ON” to automatically switch to iPod mode when an iPod 
is connected.

Default values: BEEP ON, P-VOLUME 12, USA, CLOCK ON, 12 HOUR, CONTRAST 0, 
BRIGHTNESS 4, AUTO IPOD ON.

Equalizer

Press the 

EQ/LOUD

 button (11) to select one of the following equalization sound settings: EQ 

FLAT, EQ JAZZ, EQ ROCK, EQ CLASSIC, EQ VOCAL or EQ DISP OFF. 

Loudness

Press and hold

 the 

EQ/LOUD

 button (11) to turn the loudness feature setting on/off.

Auxiliary Input

To access an auxiliary device: 

1.

Connect the portable audio player to the AUX in on the front panel (21) or to the AUX IN 
cables on the back of the radio.

2.

Press the 

MODE

 button to select Aux In mode.

3.

Press 

MODE

 again to cancel Aux In mode and select another available playback mode.

NOTE: The front AUX input overrides the rear Auxiliary Input.

Disp/Scroll

When in Sirius Satellite Radio or iPod mode, press the

 DISP/SCROLL

 button (14) to view the 

entire program information.

Remote Sensor

Point the remote control handset (sold separately) at the remote sensor IR (2) and press the 
function keys on the handset to control the system.

Summary of Contents for VR182

















Reviews: