13
VM9213
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays the following:
“Warning !!! It is illegal to view video while driving or
operating a motor vehicle. Set parking brake to view
video.” Rear video screens, if applicable, will operate
normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the
OPEN
button (4).
The unit beeps and then opens.
Closing the TFT Screen
Press the
OPEN
button (4) again to close the TFT screen.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered and disc
play begins.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized. When
parental code is entered using the remote, the play/
pause button must be pressed to confirm entry. (See
“General Sub-menu Features” on page 9.)
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Ejecting a Disc
Press the button (11) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs,
press and hold
the button (11) on the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the
SRC
button (6) on the front panel or remote control
(8) or touch the top left corner of the screen.
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
A – Displays playing information
B – Displays on-screen control menu
Controlling Playback
To access the on-screen controls, touch the bottom 1/3 of the
screen (section B). Touch the
1/2
button to view a second
page of controls
Stopping Playback
Touch the stop button ( ) on the screen or press the
button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (
>
) on the screen or press the
>/
||
button on the remote control (18) to suspend or resume
disc play.
Slow Motion Playback
Press the
/
BAND
button on the remote control for slow
motion playback (Slow Forward: 1/2, 1/4, 1/6, 1/7, Slow
Rewind: 1/2, 1/4, 1/6, 1/7).
Rewind
Press the
<<
button (22) on the remote control or the <<
button on the screen to play the current title in reverse. Keep
pressing and releasing the button to increase the rate from
“2X” to “4X”, “8X”, and “20X”.
Press
>/||
(18) on the remote control or touch the on screen
play button (>) to resume normal play.
Fast Forward Playback
Press the
>>
button (14) on the remote control or the >>
button on the screen to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”,
“8X”, and “20X”.
Press
>/||
(18) on the remote control or touch the on screen
play button (>) to resume normal play.
Repeat Playback
Press the
REPT
button (7) on the remote control or the
button on screen to alter repeat mode according to the
following:
•
DVD: Repeat Chapter, Repeat TItle, Repeat Off
•
VCD (PBC Off): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available
if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
•
Press the
REPT
A-B
button (6) on the remote control to
set the start point (A) of the repeated section.
•
Press the
REPT A-B
button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.
•
Press the
REPT A-B
button again to cancel the A-B
section setting and stop repeat play.
A
B
1/2
BACK
MENU
2/2
BACK
DISP
EQ
AUDIO
A-B
TITLE
SUBTITLE
