Jensen VM9022HD - AM/FM HD Radio Installation And Operation Manual Download Page 18

Page: 18 / 46

VM9022HD

OPERATING INSTRUCTIONS

Power On / Off

Press the

/SRC

button (6) (or any other button on the front

of the unit except reset), or the

/POWER

button (4) on the

remote control, to turn the unit on. The buttons on the front of
the unit light up and the current mode status appears on the
TFT screen (17).

Press and hold

the button to power off the unit.The monitor

is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The
Beep tone can be disabled through the Setup menu.

Volume Adjustment

To increase or decrease the volume level, turn the rotary
encoder (5) on the front panel or press the

VOL+/ VOL-

buttons (15, 16) on the remote control. When the volume
level reaches “0” or “40”, a beep sounds, indicating that the
adjustment limit has been reached. The volume ranges from
“0” to “40”. The TFT screen displays the volume level for 3
seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting
regardless of the volume setting prior to turning the unit off.
To program a specific turn-on volume level, turn the

AUDIO

control (2) to adjust the volume to the desired turn-on volume.

Push and hold

the

AUDIO

button while the yellow speaker

icon and level indication is displayed on the screen. The unit
will beep two times to confirm your turn-on volume setting.

Mute

Press the

MUTE

button on the front panel (8) or remote

control (3) to mute the volume from the unit. Press the

MUTE

button again to restore the volume. “MUTE” is displayed on
the screen. Adjusting the volume or using any of the audio
setup features cancels the mute function.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a
telephone call is received by a cell phone.

Steering Wheel Control (SWC)

The VM9022HD is compatible with the PAC (Pacific
Accessory Corporation) steering wheel control adapter SWI-
PS. A 3.5mm female connector (labeled “SWC Interface”) on
the back of the head unit allows connectivity to the PAC

adapter. Please refer to the instructions included with the
PAC adapter for detailed installation information.

SWC Functions

The following controls are available for most vehicles:

Vol Up

Vol Down

Mute

Seek Up / Next Track / ** Preset Up

Seek Down / Previous Track / ** Preset Down

SRC (Source)

** Select

Band

** If additional steering wheel control buttons are available on
the vehicle, function 7 / 8 may be assigned the "Select"
feature. This feature / function may not be available on some
vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is
pressed momentarily, Preset Up will be selected. If "Select"
(function 7 or 8) is held down and function 5 is pressed
momentarily, Preset Down will be selected.

Playing Source Selection

Press the

SRC

button on the front panel (6) or remote control

(8) to change between available playing sources in the
following order: RADIO, SAT, DISC, NAV, BT, iPod, SD, USB,
AUX1,

AUX2 and CAMERA. The playing mode is displayed

on the TFT screen.

Auxiliary Devices

External peripheral devices can be connected to this unit via

RCA output (AUX IN 2) or the MediaLink

Select “AUX1” to play an auxiliary device connected via the
MediaLink RCA or 3.5mm inputs. For example, you can play

music files from a portable music player, video from a video
camera and even view photos stored on a digital camera.

Select “AUX2” mode to access and control auxiliary devices
connected to the “AUX IN 2” inputs on the back of the radio.

Selecting a Source while Navigating

While navigating, other sources may be selected and listened
to such as AM-FM Tuner, CD, etc. To select a source, press

the /

SRC

button (6) and then select a source from the Front

Source Menu. Navigation voice prompts will be heard
automatically, although the navigation map cannot be seen.
(The selected source audio will be muted until the navigation
voice prompt command is completed, after which the source
audio will resume.)

Source Menu

To access the SOURCE MENU, touch the TFT screen in the
top left corner of the screen.

VIDEO

LEFT

RIGHT

3.5mm - Audio

MediaLink

iPod Connector
(GEN 5 Recommended)

USB Connector (Type A)

RCA Inputs (AUX 1)

3.5mm Left & Right
Stereo Inputs (AUX 1)

AUX1