background image

 

 E-9

1. Tap 

the

 FUNCTION

 button repeatedly to select AUX mode (AUX shows on the display). Insert a memory storage 

device (USB flash drive, SD or MMC card). 

2. Press 

the 

REC

 button; it takes 3-5 seconds to read memory device. “REC” will be flashing on the display, followed 

by “AUX REC” and then “WAITING” while the unit prepares for recording. 

3.  When recording begins, the “REC” icon and either the “USB” or “SD” icon will be flashing depending on what 

media you have inserted. “AUX” will also show on the display. 

4.  If you have a USB flash drive and an SD card inserted when recording from AUX, pressing the 

SKIP UP 

 or 

SKIP DOWN 

  button allows you to select what memory storage device you want to record to (USB or SD). 

5. Press 

the 

REC

 button again to confirm the memory storage device and the recording process will begin. 

6. Press 

the 

STOP

 

  button to stop recording. The display will show “END” and return to “AUX” mode. 

 

REMARKS: 

The recording speed is 1:1.   

- Once 

the 

REC

 button is pressed, the recording process will continue recording until the 

STOP

 

 button is 

pressed or until the memory storage device is full. 

The recording format is preset to MP3 (128 kbps/ 44.1khz) and cannot be changed.   

 
 

CASSETTE OPERATION AND RECORDING (ENCODING TO MP3) 

 

STOP / EJECT BUTTON 

Press to stop all deck operations. Press again to open the cassette door. 

FAST FORWARD BUTTON 

Press to fast forward the tape. 

REWIND BUTTON 

Press to rewind the tape. 

PLAY BUTTON

Press to start playing the tape. 

PAUSE BUTTON  : 

Press to pause the tape playback. Press again to resume playback. 

RECORD BUTTON

Press together with the 

PLAY BUTTON

 

to start tape recording. 

 

CASSETTE TAPE PLAYBACK 

1. Tap 

the 

FUNCTION BUTTON 

repeatedly to select tape mode, “tape” will show on the display.   

2. Press 

the 

cassette 

STOP/EJECT BUTTON

 

  to open the cassette door. Insert a pre-recorded cassette tape 

with the exposed tape facing down. Push on the cassette door to close it. 

3. Press 

the 

PLAY BUTTON

 

to start playback. Adjust the volume control to obtain the desired sound level. 

4. Use 

PAUSE BUTTON 

 

to pause playback, press it again to resume the playback. 

5. Press 

the 

STOP / EJECT BUTTON

 to stop the tape playback. 

 

CASSETTE TAPE RECORDING   

1. Tap 

the 

FUNCTION BUTTON

 repeatedly to select the source you want to record from (PHONO / CD / AUX / 

TUNER / USB / SD). 

2.  Insert a blank cassette tape into the tape deck. 
3.  Start playing from the source you selected above. 
4. Press 

down 

on 

the 

RECORD BUTTON

 and 

PLAY BUTTON

 at the same time to start recording to the tape. 

5. Press 

the 

STOP / EJECT BUTTON

 to stop recording. 

 

CASSETTE TAPE ENCODING TO USB/SD 

1. Tap 

the 

FUNCTION BUTTON

 to select TAPE mode, “TAPE” will show on the display. 

2.  Insert a memory storage device (USB flash drive, SD or MMC card). 
3. Press 

the 

REC

 button; it takes 3-5 seconds to read memory device. “REC” will be flashing on the display, followed 

by “TAPE-REC” and then “WAITING” while the unit prepares for recording.     

4.  When recording begins, the “REC” icon and either the “USB” or “SD” icon will also be flashing depending on what 

media you have inserted. “TAPE” will also show on the display when the recording/encoding begins. 

5. Press 

the 

PLAY BUTTON

 

on the cassette deck to start playing the tape. 

6.  If you have a USB flash drive and an SD card inserted when recording from FM, pressing the 

SKIP UP 

 or 

SKIP DOWN 

  button allows you to select what memory storage device you want to record to (USB or SD). 

Press the 

REC

 button again to confirm the memory storage device and the recording process will begin. 

7. Press 

the 

STOP

 

  button to stop recording. The display will show “END” and return to “TAPE” mode. 

8. Press 

the 

STOP / EJECT BUTTON

 on the cassette deck to stop the tape. 

 

REMARKS: 

 

The recording speed is 1:1.   

 

Once the 

REC

 button is pressed, the recording process will continue recording until the 

STOP

 

 button is 

pressed or until the memory storage device is full. 

 

The recording format is preset to MP3 (128 kbps/ 44.1khz) and cannot be changed. 

 
 
 

USB/SD OPERATION 

Summary of Contents for JTA-575



















Reviews: