9
number "
P - 01
" and “
MEMORY”
will appear with “
01
” and “
MEMORY”
flashing on
the display.
3.) To change the preset channel number location, press the
FOLDER/PRESET
+
or
FOLDER/PRESET
-
Buttons to step through the preset locations (P-01~P-20)
.
For example preset channel number P-10 is selected.
4.) To confirm the preset location, press the
ENTER/MEMORY/CLOCK ADJUST
Button again. The station at 103.2 MHz is stored in preset channel number 10.
5.) To store up to 20 FM station presets, repeat steps 1 to 4 above.
Note
: You can overwrite a preset station by storing the new frequency in its place.
RECALL PRESET RADIO STATIONS
1.) Set the JiMS-215i to the
Tuner
mode.
2.) Repeatedly press the
FOLDER/
or
FOLDER/PRESET
-
Buttons
to
recall the preset stations. Stop pressing until the desired preset channel number
appears on the Display. The Display will show the preset channel number briefly
and then revert to show the frequency of the preset radio station.
3.) Adjust the sound level by pressing the
VOLUME
+
or
VOLUME-
Buttons.
The
Volume Level reading will be displayed and revert back to the FM mode in 3
seconds.
4.) To turn
the
JiMS-215i off, press
once. The Display will become dim and the current time
is displayed.
