Jensen JCR-390, User Manual

Page: 13 / 17

E-12
REPEAT MODE
Repeat 1:
Tap the REPEAT BUTTON (#18), the REPEAT INDICATOR (#8) will light up and flash. The
current track will be repeated until it is interrupted.
Repeat All:
Tap the REPEAT BUTTON (#18) again; the REPEAT INDICATOR (#8) will stay lit. The whole
disc will be played repeatedly.
To Cancel Repeat Function:
Tap the REPEAT BUTTON (#18) again. The REPEAT INDICATOR (#8) will turn off.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP BUTTON (#23) or SKIP BUTTON (#22)
to go to the next track or go back to the beginning of the current track.
2. During play mode or Pause mode, press and hold the SKIP BUTTON (#23) or SKIP
BUTTON (#22) to search within the current track with audible high speed playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE
: Program can only be set in STOP mode.
1. Press and hold the PROGRAM BUTTON (#17). The PROGRAM INDICATOR (#7) light on
the LED DISPLAY and the program number P01 will flash.
2. Press the SKIP BUTTON (#23) SKIP BUTTON (#22) to select the track to be
programmed.
3. Press the PROGRAM BUTTON (#17) again to store the selection. The program number
will advance to P02 and flash to prompt for the next input.
4. You may repeat steps 2 to 3 to program up to 20 tracks. As soon as you have entered the
20th track, the display will show “FUL”.
5. Press the PLAY/PAUSE BUTTON (#24) to start playback in order.
6. Press the CD STOP
BUTTON (#25) to stop playback and press it twice to clear all
programmed tracks. The PROGRAM INDICATOR (#7) will go off
Note:
Normally all the programmed tracks will be played through once and then stop. However, you
may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks
(Repeat All) in the program. You may also tap the SKIP
BUTTON (#23) to go directly to
other tracks ahead or the SKIP BUTTON (#22) to go back to previous track(s) during
program play.