Jensen JCR-390, User Manual

Page: 12 / 17

E-11
To set / recall the radio presets:
The unit allows you to store up to 10 FM s tations and 10 AM stations for easy recall at any
time.
1. Set to FM or AM mode
2. Turn to the desired radio station by “MANUAL” or “AUTO” tuning method.
3. Press the PROGRAM BUTTON (#17) to enable program mode, “P01” appears in display
and flashing.
4. Press BUTTON (#23) or BUTTON (#22) repeatedly to select the desired station
memory for storage.
5. Press the PROGRAM BUTTON (#17) again to confirm the setting.
6. Repeat step 2 to 5 to store other stations if necessary.
Note:
You can overwrite a present station by storing another frequency in its place.
Recalling the Preset Stations
In FM or AM radio mode, tap the PROGRAM BUTTON (#17), the preset station number Pxx
will show on the LED DISPLAY (#1), tap the SKIP BUTTON (#22) or SKIP BUTTON
(#23) to select the preset stations.
CD OPERATION
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial CDs. They
will also read self-compiled CD-R/CD-RW discs but it may take up to 10 seconds for playback
to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or
the compatibility of the CD compilation software. Manufacturer is not responsible for the
playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
PLAY MODE
1. Tap the POWER BUTTON (#21) to turn the unit on.
2. Repeatedly tap the FUNCTION BUTTON (#19) to select CD mode. The CD indicator (#3)
will light on the left part of the LED DISPLAY (#1).
3. Open the CD DOOR (#14), load a CD with the label side facing upward and then close the
CD door.
4. Disc information (total number of tracks) will appear on the LED DISPLAY (#1).
5. Press PLAY/PAUSE BUTTON (#24) to start playing the CD. The track time will show on
the LED DISPLAY(#1).
6. While playing, press the PLAY/PAUSE BUTTON (#24) to pause, the track time will
flash on the LED DISPLAY (#1). Press PLAY/PAUSE BUTTON (#24) again to resume
playing.
7. Tap (#15) or VOLUME - (#16) to the desired volume level.
8. Press CD STOP
BUTTON (#25) to stop playing.
9. Press and hold the POWER BUTTON to turn off the unit.
NOTES: -
If skipping occurs during CD play, try turning the volume down.
- Do not open the CD DOOR when a CD is playing.