E-7
SETTING THE DATE AND TIME
The LED DISPLAY (#10) will be flashing when the unit is plugged in for the first time.
The unit is now in
standby mode.
Note:
The JCR-212 has a Date and Time feature, so you will be setting the Year,
Month and Date followed by setting the time.
Setting the Date and Time:
1.
In standby mode, press and hold the MEMORY/
SET
BUTTON (#1)
until the hour digits of the clock display
begin to flash.
2. Repeatedly tap the
BUTTON (#2) or
BUTTON
(#3) to set the hour. Press and hold the button for fast
reverse/advance setting. Make sure the correct AM or PM time is selected when
setting the hour.
Note:
The PM INDICATOR (#8) is located in the upper left part of the display.
The PM INDICATOR (#8) will light when the hour digits selected are for PM time.
The PM INDICATOR (#8) will be off when the hour digits selected are for AM time.
3.
Tap the MEMORY/
SET BUTTON (#1)
to confirm the hour
setting, the minute digits will flash to prompt for input
.
4.
Repeatedly
tap the
BUTTON (#2) or
BUTTON
(#3) to set the minute. Press and hold the button for fast
reverse/advance setting.
5.
Tap the MEMORY/
SET BUTTON (#1)
to
confirm. 12H
will light on the display.
6.
Repeatedly
tap the
BUTTON (#2) or
BUTTON (#3) to select the 12 or 24
hour clock.
7.
Tap the MEMORY/
SET BUTTON (#1)
to confirm. The year digits 20XX will flash to
prompt for input.
8.
Repeatedly
tap the
BUTTON (#2) or
BUTTON (#3) to set the year. Press
and hold the button for fast reverse/advance setting.
9.
Tap the MEMORY/
SET BUTTON (#1)
to confirm. The month digits XX will flash to
prompt for input.
10.
Repeatedly
tap the
BUTTON (#2) or
BUTTON (#3) to set the month.
Press and hold the button for fast reverse/advance setting.
11.
Tap the MEMORY/
SET BUTTON (#1)
to confirm. The date digits d XX will flash to
prompt for input.
12.
Repeatedly
tap the
BUTTON (#2) or
BUTTON (#3) to set the date. Press
and hold the button for fast reverse/advance setting.
13.
Tap the MEMORY/
SET BUTTON (#1)
to confirm and complete the setting.
14.
The time will light on the display and stop flashing.
Notes:
•
The unit will automatically save the settings and exit the time set mode if you do
not press any buttons within 10 seconds.
•
In standby mode,
Tap
the MEMORY/
SET BUTTON (#1) to review the Weekday.
( d1 = Monday, d2 = Tuesday, d3 = Wednesday, d4 = Thursday, d5 = Friday,
d6 = Saturday and d7 = Sunday ).
Tap the
BUTTON (#2) to review the month and date. (12 08 = December 8)
Tap the
BUTTON (#3) to review the year.
