E-8
ALARM OPERATION
The JCR-212 features a dual alarm clock.
Setting the alarms:
1. In standby mode, press and hold the
POWER
BUTTON
(#7)
, the ALARM 1
INDICATOR (#11) and the hour of the
alarm time will flash.
2. Tap
the
BUTTON (#2) or
BUTTON (#3) to set the
hour
. Press and hold the button for fast reverse/advance setting.
Make sure the
correct AM or PM time is selected when setting the hour.
Note:
The PM INDICATOR (#8) is located in the upper left part of the display.
The PM INDICATOR (#8) will light when the hour digits selected are for PM time.
The PM INDICATOR (#8) will be off when the hour digits selected are for AM time.
3. Tap the
POWER
BUTTON (#7)
to confirm the hour
setting, the minute digits will flash to prompt for input.
4. Tap
the
BUTTON (#2) or
BUTTON (#3) to set the
minute. Press and hold the button for fast reverse/advance
setting.
5. Tap the
POWER
BUTTON (#7)
to confirm the minute setting. The alarm
frequency will flash to prompt for input.
6. Tap
the
BUTTON (#2) or
BUTTON (#3) to select the alarm frequency.
( 1 – 7 = Daily, X = selected day of a week, 1 – 5 = Monday to Friday.
6 – 7 = Saturday and Sunday)
7. Tap the
POWER
BUTTON (#7)
to confirm the
alarm frequency.
8.
T
he ALARM 2
INDICATOR (#12) and the hour of the alarm time will now flash to
prompt for input.
9. Repeat step 2 through step 7 to set ALARM 2.
10. The unit will return to standby mode once the alarm setting process is completed.
Note: The unit will automatically save the settings and return to Standby mode if you
do not tap any button within 10 seconds.
Setting the “wake to” alarm source:
ALARM 1: In Standby mode, repeatedly tap the ALARM 1 BUTTON (#5) to select
the ALARM 1 source. The ALARM 1
INDICATOR (#11) will flash and the display
will show one of the following options as you repeatedly tap the ALARM 1 BUTTON
(#5).
bb
– Beeping alarm will wake you.
FM Station (example: 95.5) - the last FM radio station you listened to will wake you.
AM Station (example: 720) - the last AM radio station you listened to will wake you.
OFF – Turns OFF ALARM 1 and the ALARM 1
INDICATOR (#11) will turn OFF.
Alarm 2 source or Off setting is same as above but tap the ALARM 2
BUTTON
(#6).
Note: The unit will automatically save the settings and return to Standby mode if you
do not tap any button within 5 seconds.
Waking to Alarm - Turning the “wake to” Alarm ON:
A beeping Alarm will automatically turn on when the alarm time is reached. The
corresponding
ALARM 1
or ALARM 2
INDICATOR (#11 or #12) will flash.
Press the SNOOZE BUTTON (#4) to temporarily turn off the alarm, or
press the
POWER BUTTON (#7) to turn the alarm off.
If no buttons are pressed when the alarm is sounding, it will continue sounding for
60 minutes and then turn off automatically.
