E-14
When playing CD, the play modes are shown as below.
Repeat 1
Repeat All
Random
Normal
REPEAT 1 - the track being played and will repeat continuously. Repeat one icon
shows in
display.
REPEAT FOLDER- Folder tracks will repeat continuously. Repeat Folder icon FOLDER
shows in display.
REPEAT ALL - all tracks will repeat continuously. Repeat All icon
shows in display.
RANDOM – the tracks in the disc will be played in random sequence. Random icon “RDM” shows
in display.
PLAY TRACK SEQUENCE PROGRAMMING (REMOTE CONTROL ONLY)
This function allows the tracks to be played in a programmed sequence.
NOTE:
Program can only be set in STOP mode.
1. Tap the
PROG. Button
on remote control, the program track number “P01” and the icon
“MEM” show in the LCD display. (Note:”00 P-01” will be in the display if you are programming
first time).
2. Use the
or
Button
on main unit or remote control to select the desired track. The
track number will be shown in display.
3. Tap the
PROG. Button
on remote control to store the selected track in the memory, the next
program number will advance one (i.e.“P02”) in LCD display.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 30 tracks.
Display will show “FULL” after 30 tracks have been programmed.
5. Tap the
Button
on main unit or remote control to start playing the CD or MP3 CD in the
programmed sequence.
6. Press the
PLAY MODE Button
on remote control to select Repeat 1/All or Random play if
necessary.
7. To stop playing, press the
STOP Button
on main unit or remote control.
8.
To cancel the program play, press the
STOP Button
on main unit or remote control twice,
“MEM” icon disappears from display.
BLUETOOTH OPERATION
Press the
STANDBY-ON
Button
to turn ON the unit and follow the directions below to connect
via Bluetooth.
PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH
ENABLED DEVICE to the JBS-300
If the JBS-200 has never been paired with a Bluetooth device before. You need to follow the
pairing instructions below to link the JBS-300 with your Bluetooth device.
1. Press the
STAND-BY/ON
Button
on main unit or remote control to turn on the unit.
2. Tap the
FUNCTION Button
on main or remote control to select Bluetooth mode, Bluetooth
“bt” message appears in display and flashing.
3. If the JBS-300 has never been paired with a Bluetooth device before or cannot find the last
paired device, the flashing “bt” on LCD will indicate the JBS-300 is in search mode. You need
to follow the pairing instructions below to link the JBS-300 with your Bluetooth device.
Turn on the Bluetooth function of your Bluetooth device and enable the search or scan
function to find the JBS-300.
Select "JBS-300" from the device list when it appears on your device screen. If required,
enter the pass code “0000” to pair (link) the JBS-300 with your device.
4. After successfully pairing (linking), display will change to show “bt” steadily, the Bluetooth icon
also will show in display. You can begin playing music from your Bluetooth device wirelessly to
the speaker.
