E-9
GETTING STARTED
ACCESSORIES INCLUDED
Carefully remove the unit and all accessories from the package.
Please verify that you have all the following accessories before recycling the gift box.
Main Unit and Stand
User Manual
AC/DC adapter
Remote control
Wall mounting instruction sheet
Wall mounting kit (2 screws and 2 plastic anchors)
POWER SOURCE
AC Power Connection
Connect the mains power adapter.
To do this, place
the connection cable
plug in the socket DC IN and the supplied mains adapter into a properly installed earthed power
socket which is accessible at all times
NOTE ON NON-MAGNETICALLY SHIELDED SPEAKERS
This unit is not magnetically shielded and may cause color distortion on the screen of some TVs or
video monitors. To avoid this, you may need to move the unit further away from the TV or monitor
if unnatural color shifts or image distortion occurs.
REMOTE CONTROL
The remote control operates on one CR2025 battery (included). To
activate the remote control, remove the insulation tab inserted in the
battery compartment.
When the operation of the remote control becomes intermittent or
unsatisfactory, replace the original battery with a new 3-volt lithium
battery.
1. Press down on the compartment cover, slide out the battery
holder from the remote control case.
2. Replace the 3V CR2025 battery. Be sure the battery is installed
correctly. The remote will not work if the battery is installed with
the wrong polarity.
CAUTION:
1.)Danger of explosion if the battery is replaced incorrectly.
2.)Replace only with the same or equivalent type battery.
3. Insert the battery holder back into the battery slot.
NOTE:
Only use a well-known brand of battery to ensure the
longest life and best performance.
