Jensen FOX1000i, Manual

Page: 29 / 86

28
It can only set one station for both alarms. When it reaches the alarm
time, the unit connects to the internet if the set network is available.
Therefore, there may be some delay from the alarm to the radio play. If
no network is connection in one minute, the alarm will change to
Melody automatically.
After
Alarm NAP is set, it alarms once is 5/10/20//30/6090/120 minutes
depending on which one you have set.
You may choose Alarm Volume to configure the volume of the alarms.
When the alarm(s) is/are set, there will be a clock icon at the top of the
display. The clock icon with alarm time will also clearly display on the
standby mode screen.
During alarm, press any key to enter snooze mode. It will alarm again in
5 minutes. Press the
STANDBY key to stop the alarm.
Timer
Press Timer on the remote control
to setup the timer. Use the arrow
keys on the remote to set the timer
and press
OK to confirm.