Jensen CD3610XM Owner'S Manual Download Page 23

CD3610XM

23

Troubleshooting

12-Month Limited Warranty

AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that 
should this product or any part thereof, under normal use and conditions, be proven defective in material or 
workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced 
with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To 
obtain repair or replacement within the terms of this Warranty, please contact Jensen at the telephone 
number provided below.
This Warranty does not extend to the elimination of car static or motor noise, to correction of antenna 
problems, to costs incurred for installation, removal, or reinstallation of the product, or damage to tapes, 
compact discs, accessories or vehicle electrical systems. This Warranty does not apply to any product or 
part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, 
improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory 
serial number/bar code label(s) or markings. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS 
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, 
SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE 
PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, 
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE 
DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY 
HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT 
WITHIN A PERIOD OF 12 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE 
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF 
THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative 
is authorized to assume for the Company any liability other than expressed herein in connection with the sale 
of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of 
incidental or consequential damage so the above limitations or exclusions may not apply to you. This 
Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
U.S.A: 1-800-323-4815
CANADA: Call 1-800-323-4815 for location of warranty station serving your area.

Problem

Cause

Corrective Action

Does not operate (display does 
not light)

No power to yellow wire; no power to 
red wire

Check connection with test light; check vehicle 
fuse with test light

Inline fuse blown

Replace fuse

No power to unit

Inline fuse blown

Check/replace fuse

No speakers operate (display 
lights normally)

Speaker harness not connected

Connect speaker harness; check speaker wires

Not all speakers operate

Incorrect splices or connections

Check all splices and connections

Speaker wires shorting to chassis 
ground or to each other

Check splices, insulate all bare wires

Blows fuses

Power wire shorting to ground

Make sure wire is not pinched

Speaker wires shorting to ground

Make sure wire is not pinched

Incorrect fuse/fuse too small

Install fuse of correct rating

Specifications

CEA Power Ratings

Power Output  . . . . . . . . . . . . . . . .16 watts RMS X 4 channels into 4-ohms @ < 1% THD+N
Signal to Noise Ratio. . . . . . . . . . . . . . 90dBA below reference. (Reference: 1 watt, 4-ohms)
Frequency Response  . . . . . 20Hz to 20kHz (-3dB), Auxiliary input used as source reference
Reference Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4VDC 

CD Player

Signal to Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  -90dB
Frequency Response  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20Hz to 20kHz, -3dB
Channel Separation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  > 55dB @ 1kHz
D/A converter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-Bit/Ch

FM Tuner

Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5MHz - 107.9MHz
Mono Sensitivity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12dBf
50dB Stereo Quieting Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16dBf
Stereo Separation @ 1kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >30dB
Frequency Response  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30Hz to 14kHz, -3dB

AM Tuner

Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  530kHz - 1710kHz
Sensitivity @ 20dB Signal to Noise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30uV
Frequency Response  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50Hz - 2kHz, -3dB

Auxiliary Input 

Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . .400mV RMS for 1 watt RMS into 4-ohms
Frequency Response  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20Hz to 20kHz, -3dB
Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10k-ohms

General 

Power Supply  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 to 16VDC, negative ground
Fuse  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 amp, ATO type
Wire Harness  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-pin quick-disconnect 
DIN chassis dimensions . . . . . . . . . . . . . . . . . . . .  2" x 7" x 7"  (102mm x 178mm x 178mm)
** Specifications subject to change without notice.

Summary of Contents for CD3610XM



























Reviews: