8
8
8
5. Then, fasten the custom panel to the door using two wood
screws (provided in installation kit) at each corner.
NOTE: Do not use the same screws that were previously
removed.
6. Press the gasket firmly back into it’s original position.
7. For 8" (203 mm) or 6
¹⁄₄
" (160 mm) custom handles, install the
custom handle from the inside/back of the wine cellar door
using screws provided with the handle.
Door Closing
Door Closing
Your wine cellar has four leveling legs. If your wine cellar seems
unsteady or you want the door to close more easily, adjust the
wine cellar’s tilt using the instructions below.
1. Plug into a grounded 3 prong outlet.
2. Move the wine cellar into its final location.
3. Turn the leveling legs to the right to lower the wine cellar, or
turn the leveling legs to the left to raise it. It may take several
turns of the leveling legs to adjust the tilt of the wine cellar.
NOTE: Having someone push against the top of the wine
cellar takes some weight off the leveling legs. This makes it
easier to adjust the leveling legs.
4. Open the door and check that it closes as easily as you like.
If not, tilt the wine cellar slightly more to the rear by turning
both front leveling screws to the right. It may take several
more turns, and you should turn both leveling legs the same
amount.
A. M4 x 14 wood screws
A
A
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install wine cellar.
Failure to do so can result in back or other injury.
